Material to be separated falls freely through the inlet onto the coarse screen, which removes such coarse impurities as string, straw and stones. Throughs fall onto the sand sieve, which removes broken kernels, sand and other fine impurities. Tailing from the lower sieve layer consist of cleaned grain passed onto the outlet.The circular movement of the sieve facilitates an increase of the capacity on a given sieve surface and also an increase of the sieve effect. If the product must be aspirated, the SIFTER separator can be supplied with aspiration channel-built on the outlet. It will improve the efficiency of separating results.An oscilating feeder delivers a thin, uniform stream of product over the entire width of the aspirating channel. The light particles are carried away by the aspirating air that flows through channel while the separated and aspirated product drop to the outlet. Because of the many possible ways in which the air velocity can be regulated by adjusting the value of the aspiration channel. The aspirating effect can be adjusted to an optimum for he product to be aspirated. Steel base, Sieve box enclosed in steel housing, suspended and swinging freely on 4 sets of wire ropes. Removable security glass cover for convenient viewing. Easily removable sieves. Effective packing. Sieves cleaned by rubber balls, Adjustable driving motor. V-belt drive to flywheel located under sieve box. Flywheel rotates on ball bearings. The throw is produced by attaching lead weights to balance the flywheel and maintain the state of equilibrium. Outlet channels for the tailing from the coarse sieve as well as the throughs from the sand sieve are located at either the left or the right sides also at the outsides in acse of a double machine. Available in 6 models : Capacity range 3 tons to 30m tons per hour. Model Length without Aspiration Channel Length with Aspiration Channel Width Height Quantity of Air Required Cubic Meter/Min Capacity of Wheat for Cleaning in Tons per hour SIFTER-950 1450 2050 850 1455 30 2-3 TONS SIFTER-975 1450 2050 1105 1455 40 3-5 TONS SIFTER-9100 1450 2050 1355 1455 60 5-6 TONS SIFTER-1450 1450 2050 1525 1455 80 6-8 TONS SIFTER-14150 1800 2420 1800 1455 100M3/MN 10-14 TONS SIFTER-2000 3050 2600 1900 1500 150M3/MN 20-25 TONS We are continuously trying to improve our products and therefore reserve the right to change design, material and specifications without previous notice. Top